Used Nokia Flexi Multiradio 10 FSMF system module 472181A

Nokia FSMF: Key Specs and Use Cases

The Nokia FSMF (product code 472181A) is the core system module of the Nokia Flexi Multiradio 10 base station. It is a 3U, IP65-sealed baseband unit that runs GSM/EDGE, WCDMA/HSPA and LTE (FDD and TDD), either in a single technology or concurrently, and it can be mounted outdoors without a cabinet. On its own it handles 36 GSM transceivers, 528 WCDMA channel elements or 3 LTE cells at 20 MHz, and its capacity can be extended with up to two FBBA or FBBC sub-modules. This makes the FSMF a common spare and expansion unit for operators that still run large Flexi networks.

This article summarises the key FSMF specifications from Nokia’s Flexi Multiradio 10 system module description and explains where the unit still fits in today’s networks.

FSMF Key Specifications

The figures below are taken from Nokia’s Flexi Multiradio 10 Base Station System Module Description. Capacity figures are peak values for the core module without extension sub-modules.

Item Nokia FSMF
Product code 472181A
Platform Flexi Multiradio 10 BTS
Radio technologies GSM/EDGE, WCDMA, HSPA/HSPA Evolution, LTE FDD and TDD (dedicated or concurrent)
Dimensions (H x W x D) 133 x 447 x 420 mm (3U)
Weight 11.5 kg with core module
Ingress protection IP65
DC supply -48 V DC nominal, -40.5 V to -57 V DC nominal range
Power consumption 125 W typical, 180 W maximum
GSM capacity 36 TRX
WCDMA capacity 528 channel elements; HSDPA 756 Mbps, HSUPA 115 Mbps
LTE capacity 3 cells at 20 MHz; 450 Mbps DL / 150 Mbps UL
Radio / fronthaul ports 3 optical SFP ports (RF/EXT1-3), plus EIF2/RF/EXT6 configurable as a fourth
Fronthaul protocols OBSAI RP3-01 up to 6.144 Gbps; CPRI 1.2, 2.5, 4.9 and 6.1 Gbps
Transport EIF1: RJ45 100/1000Base-T; EIF2: optical SFP
Synchronisation HDMI SYNC IN/OUT; IEEE 1588-2008, Synchronous Ethernet, 1PPS; GNSS needs an additional unit
Capacity extension Up to 2 sub-modules (FBBA or FBBC)

Interfaces Explained

Transport

The FSMF has two built-in transport interfaces. EIF1 is an electrical RJ45 Gigabit Ethernet port. EIF2 is an optical SFP port and is the default external transport interface. If the site uses EIF1 for backhaul, EIF2 can be reconfigured in software as an additional radio port. Synchronous Ethernet output requires the optional FTIF transport sub-module.

Radio connections

Radio modules connect to the FSMF over optical fibre on the RF/EXT ports, using OBSAI RP3-01 at up to 6.144 Gbps or CPRI. This is how the FSMF drives Flexi RF modules such as the Nokia FXED (1800 MHz) and Nokia FRGU (2100 MHz). Several newer AirScale radios, for example the Nokia ARDA, also list the FSMF as a supported system module, so a failed Flexi radio can be replaced with an AirScale radio without changing the baseband first.

Chaining and synchronisation

An SRIO interface allows system modules to be chained; Nokia’s architecture supports up to nine chained system modules. Timing can come from IEEE 1588-2008, Synchronous Ethernet or 1PPS. A GNSS receiver is not built in and has to be added as a separate unit when satellite timing is required.

Expanding Capacity: FBBA vs FBBC

The FSMF accepts up to two capacity extension sub-modules, which connect through the BB EXT interfaces and are powered from the core module. The right choice depends on which radio technologies need more capacity.

Item FBBA FBBC
WCDMA capacity 576 channel elements; HSDPA 756 Mbps, HSUPA 157 Mbps Not listed
LTE capacity 3 cells at 20 MHz; 450 Mbps DL / 150 Mbps UL 3 cells at 20 MHz; 450 Mbps DL / 150 Mbps UL
Power consumption 85 W typical / 136 W maximum 91 W typical / 147 W maximum
Dimensions (H x W x D) 42 x 220 x 363 mm 42 x 220 x 363 mm
Weight 3.35 kg 3.35 kg

In practice, FBBA is used where WCDMA and LTE both need more capacity, while FBBC is an LTE capacity sub-module. Remember that the DC supply and power budget of the site must cover the core module plus any sub-modules: a fully extended FSMF draws considerably more than the 125 W typical figure of the core module alone.

Typical Use Cases for the FSMF Today

  • Spares for existing Flexi networks. Many operators still run large numbers of Flexi Multiradio 10 sites. Keeping FSMF spares in stock is the simplest way to restore a failed site with the same configuration and software.
  • Single-RAN 2G/3G/4G sites. Because one FSMF runs GSM, WCDMA and LTE concurrently, it suits rural and suburban sites that must keep legacy layers alongside LTE.
  • Outdoor sites without a cabinet. The IP65 casing allows pole or wall mounting, which saves cabinet space and cost on small sites.
  • Capacity top-ups. Adding a second FSMF or FBBA/FBBC sub-modules is often faster than a full platform change when a site only needs a few more LTE cells.
  • Phased migration. Operators moving to AirScale often keep FSMF units running on some sites for several years. Our guide Nokia FSMF to AirScale: Upgrade Path Explained covers when it makes sense to swap.

Limitations to Keep in Mind

  • No 5G NR. The FSMF is a 2G/3G/4G platform. 5G NR requires AirScale baseband, such as the ABIO capacity card.
  • Fixed growth steps. Once both sub-module positions are used, further growth means adding another system module.
  • Software dependency. Supported radios, sub-modules and features depend on the software release running on the network. Confirm that the FSMF and every radio on site are supported by your release.

What to Check When Buying a Used FSMF

  • Confirm the product code 472181A and record the version suffix and serial number from the label.
  • Check the SFP cages, the RJ45 port, the HDMI sync connectors and the DC input connector for damage or corrosion.
  • Check the casing seals and cover, since the IP65 rating depends on them for outdoor use.
  • Ask whether FBBA/FBBC sub-modules, the FTIF transport sub-module or SFP modules are included; they are usually separate items.
  • Licences are managed by the network, not stored on the unit. Plan your licence pool for the new or replaced site.

FAQ

Is the FSMF an indoor or outdoor unit?

Both. The FSMF casing is IP65-sealed, so it can be installed outdoors without a cabinet, and it can also be mounted indoors or in a rack.

How many LTE cells does an FSMF support?

Nokia lists 3 LTE cells at 20 MHz for the core module. Each FBBA or FBBC sub-module adds a further 3 cells at 20 MHz, and up to two sub-modules can be fitted.

Does the FSMF support CPRI radios?

Yes. The RF/EXT ports support OBSAI RP3-01 and CPRI at 1.2, 2.5, 4.9 and 6.1 Gbps. Support for a specific radio model still depends on the software release.

Can the FSMF run 5G?

No. The FSMF supports GSM, WCDMA and LTE. For 5G NR, an AirScale system module with an ABIO capacity card is needed.

Source Tested Nokia FSMF Units from Haokang Trading

We supply used and refurbished Nokia FSMF system modules together with Flexi and AirScale radios. See the full range in our Nokia category. Every unit is functionally tested before shipment, and radio units such as RRUs are also VSWR tested. All units come with a 90-day warranty, and we ship worldwide in secure packaging. Contact us on WhatsApp at +86 187 3329 4669 or +86 139 3088 8705, email jack@telecombts.com, or use the form at https://telecombts.com/contact-us/. We also buy surplus Huawei, Ericsson and Nokia equipment: see sell your equipment.

Shopping Cart