Used Ericsson Baseband 6648 / RAN Processor 6651 baseband unit

Ericsson Baseband KDU Numbers: How to Identify Units

The quickest way to identify an Ericsson baseband unit is to read the KDU product number and the R-state on its label, not the model name printed on the front panel. The KDU number tells you exactly which baseband it is (for example KDU 137 848/11 for a Baseband 6630), the suffix after the slash identifies the variant, and the R-state tells you the hardware revision. This guide explains how to read those codes for the Baseband 6630, 6631, 6648 and RAN Processor 6651, and what to send a supplier so you receive the right unit.

Why the Model Name Is Not Enough

Ericsson sells several basebands in the same 1U, 19-inch format, and from the front they look very similar. Traders, spreadsheets and even site records often shorten names to “BB6630” or “6648”, which hides the details that matter: the variant, the hardware revision and sometimes whether a listing refers to the bare unit or to a package number. When you order spares or plan a swap, two units with the same model name can still differ in revision, power draw or operating temperature range. The label is the only reliable reference.

How Ericsson Baseband Product Numbers Are Built

Ericsson uses letter-coded product numbers across its hardware. Radio units carry KRC numbers (covered in our guide to Ericsson radio KRC numbers), while baseband and digital units carry KDU numbers. A typical baseband label shows:

  • Product number: the KDU code, for example KDU 137 0015/11. The part before the slash identifies the product; the suffix after the slash (/11, /12 and so on) identifies the variant.
  • R-state: the hardware revision, written as R plus a number and a letter (for example R2C). Later R-states can differ in components, power consumption or environmental limits.
  • Serial number: unique to each unit. Useful for tracking, warranty and asset records.
  • Product name: for example “Baseband 6648”. Treat this as a description, not as the identifier.

Spacing varies between documents and listings. “KDU 137 0015/11”, “KDU1370015/11” and “KDU 137 0015 11” all refer to the same number, so normalise the format before you search your inventory or compare quotes.

Common Ericsson Baseband Product Numbers

The table below lists the product numbers we see for the basebands we handle. Always confirm against the label of the actual unit.

Model Product number Radio interfaces Notes
Baseband 6630 KDU 137 848/11 15 x SFP/SFP+ (CPRI) Multi-standard GSM, WCDMA, LTE unit; widely deployed
Baseband 6631 KDU 137 0071/11 12 x SFP+ (CPRI) Adds NR support; 383 mm deep
Baseband 6648 KDU 137 0015/11 (a /12 variant is also traded) 12 x CPRI/eCPRI CPRI up to 24.3 Gbps, eCPRI up to 25 Gbps
RAN Processor 6651 Read from the unit label 12 x CPRI/eCPRI RAN Compute unit for LTE and NR

The older numbering style (three digits after “137”, as on the 6630) and the newer four-digit style (as on the 6631 and 6648) both appear in the field. Neither is “more correct”; they simply belong to different product generations.

Reading the R-State: Why Revisions Matter

The R-state is easy to ignore, but it can change how a unit behaves on site. The Ericsson datasheet for Baseband 6648 is a good example: it notes that the R2C and R2D versions draw about 10% more power across the temperature range and are rated for 0 to +45 °C operation, against 0 to +55 °C for the standard unit. On a hot outdoor cabinet or a site with tight power budgets, that difference matters.

For spares, the practical rule is simple:

  • Like-for-like replacement: match the KDU number and, where possible, the R-state of the failed unit.
  • Mixed revisions: different R-states of the same KDU number usually work in the same network, but check power, cooling and the software baseline that supports the revision.
  • Record it: add the R-state to your spares list. It saves time when a supplier or your own planning team asks for it later.

KDU, KDV and Other Numbers You May See

Not every listing uses the KDU number. Some resellers list the Baseband 6630 under a KDV number (for example KDV 127 621/11). When you see a number that does not start with KDU, ask for a clear photo of the label on the unit itself, so you know which baseband you are actually buying. The same applies to software or license references that sometimes appear in listings: these do not identify the hardware.

Also keep in mind that licenses for capacity and features are tied to the node and your software setup, not printed on the hardware label. A correct KDU number confirms the hardware; it does not confirm that your network has the licenses to use all of its capacity.

Where to Find the Label

On Ericsson 1U basebands the product label is normally on the unit housing and readable once the unit is removed from the rack or cabinet. On installed units you may also read the product number and revision remotely through the node’s hardware inventory in your management tools. For a physical check, photograph:

  • The full label, in focus, showing product number, R-state and serial number
  • The front panel, showing port layout and the fan unit
  • Any damage to SFP cages, RJ45 ports or the power connector

What to Send When Requesting a Quote

To get the right unit the first time, send your supplier:

  1. Model name and full KDU number, including the suffix (for example KDU 137 0071/11)
  2. Preferred R-state, or “any” if revision is not critical
  3. Quantity
  4. Whether you need SFP modules, the fan unit or mounting hardware included
  5. The software baseline in your network, if you are unsure whether a unit is supported

If you are still choosing between models, our comparison of the Ericsson Baseband 6630 vs 6631 covers ports, power and NR support. You can browse all units in our Ericsson category.

FAQ

What does the “/11” at the end of a KDU number mean?

It is the variant suffix. Units with the same base number but different suffixes (for example KDU 137 0015/11 and /12) are variants of the same product. Order the suffix your network uses unless your planning team confirms the alternative.

Is the R-state the same as the software version?

No. The R-state is the hardware revision printed on the label. Software is loaded on the node and is managed separately.

Can I identify a baseband from a front-panel photo only?

Only roughly. Port count helps (for example, 15 radio ports on the 6630 against 12 on the 6631), but the KDU number and R-state on the label are the only reliable identifiers.

Do the 6648 and 6651 use the same radio interfaces?

Both offer 12 radio ports supporting CPRI and eCPRI. Supported line rates, capacity and features depend on the specific unit and your software release, so check the datasheet for the unit you plan to deploy.

Buy Tested Ericsson Basebands

We supply used and refurbished Ericsson Baseband 6630, 6631, 6648 and RAN Processor 6651 units, with the KDU number and R-state confirmed before you order. Every unit is functionally tested before shipment, comes with a 90-day warranty, and is shipped worldwide in secure packaging. Contact us on WhatsApp at +86 187 3329 4669 / +86 139 3088 8705, email jack@telecombts.com, or use the form on our contact page.

We also buy surplus Huawei, Ericsson and Nokia equipment. Sell your equipment to us.

Shopping Cart