A used Nokia AirScale baseband is not one product but a set: a subrack (for example the AMIA), one or two common plug-in units (ASIA or ASIB) and one or more capacity plug-in units (ABIA or ABIO). Most problems with second-hand AirScale purchases come from the combination rather than from a single faulty card: an ABIO ordered with an ASIA, the wrong card for the radio technologies on site, or missing SFP modules. Before you buy, confirm the product codes on the labels, check that the common and capacity cards are a supported pairing for your software release, inspect connectors and fans, and ask for a test record that shows the cards working together in one subrack.
This guide is a practical checklist for operators, maintenance companies and integrators sourcing used or refurbished AirScale baseband.
1. Start from the site requirement, not the card name
Write down what the baseband has to carry before you look at offers. The answers decide which cards you need:
- Radio technologies: GSM, WCDMA, LTE, 5G NR, or a mix.
- Radios on site: model, band and fronthaul type (OBSAI for Flexi RF modules, CPRI for most AirScale radios, eCPRI for newer 5G radios).
- Number of cells and carriers per sector, now and after planned expansion.
- Installation: indoor room or cabinet, or outdoor without a cabinet.
- Software release running in your network, because supported hardware combinations are defined per release.
With this list in hand you can match each requirement to a specific card instead of comparing offers on price or availability alone.
2. Know the main AirScale building blocks
The table summarises the units most often traded on the used market. Product codes are the ones printed on the unit label.
| Unit | Product code | Role | Key points for buyers |
|---|---|---|---|
| AMIA | 473098A | Indoor subrack | 3U, 19-inch, IP20; 2 common slots and 6 capacity slots; -48 V DC |
| ASIA | 473095A | Common unit | First-generation control and transport card |
| ASIB | 473764A | Common unit | Later common card; listed as a supported common unit for ABIO |
| ABIA | 473096A | Capacity unit | GSM, WCDMA, FDD-LTE and TD-LTE; 6 x SFP+; CPRI up to 9.8 Gbps and OBSAI 3/6 Gbps |
| ABIO | 475266A | Capacity unit | LTE and 5G NR; 9 x SFP28; eCPRI 10/25 Gbps, CPRI up to 9.8 Gbps, OBSAI 3/6 Gbps |
For a closer look at the subrack, see our guide to the Nokia AirScale AMIA. The differences between the two capacity cards are covered in Nokia ABIA vs ABIO.
3. Check that the cards are a valid combination
Common unit and capacity unit pairing
This is the most common mistake. The ABIO datasheet lists ASIB and ASIL as its common units, not ASIA. If your plan includes ABIO for LTE or 5G NR capacity, buy an ASIB. An ASIA remains a valid choice for ABIA-based 2G/3G/4G sites, and it is often the right like-for-like spare for an existing ASIA fleet.
Capacity card and radio technology
The Nokia ABIA covers GSM, WCDMA and LTE. The Nokia ABIO covers LTE and 5G NR, but not GSM or WCDMA. A site that still carries 2G or 3G traffic therefore needs at least one ABIA, even if ABIO is added for LTE and NR.
Subrack and installation
The ABIO datasheet lists the AMIA, AMOB and AMOD subracks. The AMIA is an IP20 indoor unit, so outdoor sites without a cabinet need an outdoor subrack or a suitable cabinet. Do not buy an AMIA for a pole or wall installation that has no enclosure.
Software release
Supported combinations of common units, capacity cards and radios depend on the software release. Before you place an order, confirm with your network team that the exact hardware mix, including every radio on site, is supported by the release you run. Capacity and features are also governed by the licences in your network, which are separate from the hardware.
4. Read the labels
Do not rely on the card name in an offer or on a photo of the front panel alone. Ask for a clear photo of each label and check:
- Product code (for example 473096A for ABIA or 475266A for ABIO) and the version suffix.
- Serial number, so units can be traced through testing, shipping and warranty.
- That the label matches the physical card: front panel, number and type of SFP cages, and connector layout.
If you are unsure how Nokia codes are structured, our article on Nokia product codes explains how to read them.
5. Inspect the physical condition
| Item | What to look for |
|---|---|
| Backplane connectors (cards and subrack) | Bent, pushed-in or missing pins; signs of forced insertion |
| SFP cages | Bent cages, broken latches, debris; dust caps fitted on unused ports |
| Front panel and ejectors | Cracked panels, broken ejector handles or loose screws |
| Subrack fans | All fans present, spinning freely, no abnormal noise |
| DC input | Burn marks, corrosion, damaged terminals |
| Blanking plates | Present for unused slots, so airflow stays correct |
| Packaging | Each card in an anti-static bag with rigid protection; subrack well padded |
6. Confirm SFP modules and fronthaul
Optical modules are often not included with used baseband cards, and they decide whether the link to the radio comes up. ABIA uses SFP+ cages and ABIO uses SFP28 cages. Match each module to the link rate and protocol of the radio (OBSAI, CPRI or eCPRI) and to the fibre type and distance on site. Clarify in the offer whether SFPs are included, and if so which types and how many.
7. Ask for test evidence
A card that boots on its own does not prove it will work in your configuration. Ask the supplier to test the cards as a system: subrack, common unit and capacity units together, with each card recognised and no hardware alarms. For capacity cards, a test that brings up the optical links with SFPs installed gives more confidence than a basic power-up. Keep the test record with the serial numbers for your warranty file.
8. Plan spares and future growth
- Standardise on one common unit type across sites where possible, so one spare covers several sites.
- Keep at least one spare capacity card of each type you run, since a single card failure can take down several cells.
- If 5G NR is on the roadmap, buying ASIB now avoids a second purchase when ABIO is added.
- For sites still on Flexi, see our FSMF to AirScale upgrade path.
FAQ
Can I use an ABIO with an ASIA common unit?
The ABIO datasheet lists ASIB and ASIL as supported common units. If you plan to use ABIO, choose ASIB.
Can ABIA and ABIO be installed in the same AMIA?
Both cards fit the capacity slots of the AMIA. Whether a mixed configuration is supported, and how it is set up, depends on your software release, so confirm the exact mix with your network team before ordering.
Do used AirScale cards come with SFP modules?
Not always. Many used cards are supplied without optics. Confirm in writing whether SFPs are included and which types they are.
Do I need the subrack if I only need a spare card?
No. If your site already has a working AMIA and common unit, a capacity card can be replaced on its own, provided it matches the existing configuration and software release.
Buy tested Nokia AirScale baseband
We supply the Nokia AMIA, ASIA, ASIB, ABIA and ABIO, individually or as complete sets, along with Flexi and AirScale radios in our Nokia product range. Every unit is functionally tested before shipment (radio units such as RRUs are also VSWR tested), comes with a 90-day warranty, and is shipped worldwide in secure packaging. Contact us on WhatsApp at +86 187 3329 4669 or +86 139 3088 8705, email jack@telecombts.com, or use the form on our contact page with the product codes and quantities you need.
We also buy surplus Huawei, Ericsson and Nokia equipment. See sell your equipment.
