Used Nokia AirScale ABIO 475266A capacity plug-in unit

Nokia AirScale LTE to 5G NR: ABIO and ASIB Upgrade Path

To add 5G NR to a Nokia AirScale site that was built for LTE with ASIA and ABIA plug-in units, the key change is the baseband: you need an ABIO capacity card, and the ABIO must sit with an ASIB (or ASIL) common unit, because Nokia does not list the ASIA as a supported common unit for the ABIO. The AMIA subrack can stay, the ABIA cards can keep carrying LTE, and many FDD radios can be moved to NR with software. This guide explains each step and what to check before you buy used hardware for the upgrade.

The starting point: a typical AirScale LTE site

Most first-generation AirScale LTE sites use three building blocks:

  • AMIA (473098A) – the indoor 3U subrack, with two slots for common units and six slots for capacity cards.
  • ASIA (473095A) – the common plug-in unit that handles control plane, transport and synchronisation.
  • ABIA (473096A) – the LTE capacity card, with six RP3-01/CPRI radio ports at up to 9.8 Gbps.

Nokia’s first software release figures for this platform were 8 LTE cells at 20 MHz with 2×2 MIMO for one ASIA and one ABIA, rising to 48 cells with two ASIA and six ABIA. This is a strong LTE platform, but the ABIA and ASIA were designed before 5G NR, so an NR layer needs newer plug-in units.

What 5G NR requires on an AirScale system module

ABIO: the LTE/5G NR capacity card

The Nokia ABIO (475266A) is a high-capacity plug-in unit that runs LTE and 5G NR, including both at the same time. According to Nokia’s technical datasheet it fits the AMIA, AMOB and AMOD subracks and works with the ASIB and ASIL common units.

Item ABIA (473096A) ABIO (475266A)
Radio technologies LTE LTE and 5G NR (simultaneous)
Radio ports 6 x RP3-01/CPRI up to 9.8 Gbps 9 x SFP28
Fronthaul types OBSAI RP3-01, CPRI eCPRI 10/25 Gbps, CPRI up to 9.8 Gbps, OBSAI 3/6 Gbps
5G NR wideband capacity Not supported Up to 12 cells at 100 MHz; massive MIMO 32 DL / 16 UL layers
Narrowband capacity See common unit figures Up to 48 LTE/NR cells, 2T2R or 4T4R
L1 throughput (DL/UL) Not listed here 14 Gbps / 7 Gbps
Supported common units ASIA, ASIB ASIB, ASIL
Power consumption Depends on configuration 160 W typical, 270 W maximum

Nokia notes that capacity, performance and features of the ABIO depend on the software release, configuration and traffic model, so treat the figures above as hardware limits rather than guaranteed site capacity.

ASIB: the common unit that unlocks ABIO

The Nokia ASIB (473764A) is the next-generation common unit for the AirScale system module. Like the ASIA, it provides three 1G electrical and two 10G optical backhaul ports and handles synchronisation. It also works with ABIA cards: Nokia’s ASIB datasheet lists LTE configurations from 1 ASIB with 1 ABIA (6 cells at 20 MHz with 4 antennas) up to 2 ASIB with 6 ABIA (36 cells at 20 MHz with 4 antennas). The ASIB can also be chained with a Flexi Multiradio 10 system module, which helps on sites that still run an FSMF. For a full comparison of the two common units, see our article Nokia AirScale ASIA vs ASIB.

Two common ways to add 5G NR

Option 1: Add a second system module for NR

Nokia site designs often leave the existing LTE system module (ASIA with ABIA cards) untouched and add a second subrack with an ASIB and one or more ABIO cards for the NR layer. The two system modules are synchronised over an HDMI cable between the common units, and the NR layer can be given its own Ethernet transport port and IP address. This keeps the LTE site stable during the 5G rollout and lets you add NR capacity without re-homing LTE cells.

Best for: operators who want minimal risk on live LTE traffic and have rack space and DC power for a second subrack.

Option 2: Move to ASIB and consolidate

Because the ASIB supports both ABIA and ABIO, another approach is to replace the ASIA with an ASIB in the existing AMIA subrack and then add ABIO cards. Over time, LTE cells can be moved from ABIA to ABIO, since the ABIO also runs LTE. Whether a given mix of ABIA and ABIO cards under one ASIB is supported depends on your software release, so confirm the exact configuration in the release documentation before ordering.

Best for: sites with limited space where one system module is preferred.

Whichever option you choose, remember that Nokia states adding a second common unit to the right half of the subrack does not increase transport capacity. Plan backhaul for the NR layer separately.

What about the radios?

NR does not always need new radios. In 2020 Nokia released a software upgrade that allows deployed 4G FDD radios to be migrated to 5G NR, and said that most of its installed FDD RF units could be upgraded this way. This supports refarming an existing band, often combined with dynamic spectrum sharing between LTE and NR.

In practice, check three things for each radio, such as the Nokia AREA or ARGA modules on an AirScale site:

  • That your software release supports NR (or LTE-NR spectrum sharing) on that exact radio model and band.
  • That the fronthaul type and line rate match the ABIO ports. The ABIO supports CPRI up to 9.8 Gbps and OBSAI, so existing CPRI radios can generally be connected at the physical level.
  • That the radio’s carrier and bandwidth limits fit the NR cell you plan. New mid-band TDD layers such as n78 normally need dedicated NR radios or massive MIMO antennas.

Upgrade checklist

Step What to check
Common unit ASIB (or ASIL) present; ASIA alone cannot host ABIO
Capacity card ABIO 475266A; record version suffix and serial number
Subrack AMIA indoor, or AMOB/AMOD outdoor, with free capacity slots
Synchronisation GNSS or other timing source; HDMI sync cable if two system modules are used
Transport Backhaul ports and IP plan for the NR layer
SFPs SFP28 or SFP+ modules matching radio line rate and fibre type
DC power -48 V DC budget covers ABIO (up to 270 W each) on top of existing load
Software and licences Release supports the configuration; NR licences planned in the network

Buying used hardware for the upgrade

Used ABIO and ASIB units are a practical way to add NR to existing AirScale sites or to keep spares. Check the sales code and version on the label, inspect the SFP cages and connectors, and ask for test results showing the unit was detected without hardware faults. Our buying guide for used Nokia AirScale baseband covers these checks in detail.

FAQ

Can an ABIA card run 5G NR?

No. The ABIA is an LTE capacity card. For 5G NR on AirScale you need a capacity card such as the ABIO.

Can I install an ABIO with my existing ASIA?

Nokia’s ABIO datasheet lists only the ASIB and ASIL as supported common units. Plan an ASIB, either replacing the ASIA or in a second system module.

Do I need to replace my AMIA subrack?

Not necessarily. The ABIO is listed as compatible with the AMIA, as well as the AMOB and AMOD outdoor subracks.

Can existing LTE radios carry 5G NR?

Many Nokia FDD radios can be migrated to NR by software, but support depends on the radio model, band and software release. Verify each model before planning the NR layer.

Source tested Nokia AirScale units

We supply used and refurbished Nokia AirScale baseband units, including the ABIO, ASIB, ABIA and AMIA, together with Flexi and AirScale radios. Browse the full range in our Nokia category. Every unit is functionally tested before shipment, and radio units such as RRUs are also VSWR tested. All equipment comes with a 90-day warranty, and we ship worldwide in secure packaging. Contact us on WhatsApp at +86 187 3329 4669 or +86 139 3088 8705, email jack@telecombts.com, or use the form at https://telecombts.com/contact-us/. We also buy surplus Huawei, Ericsson and Nokia equipment.

Shopping Cart